AWS

Tarsco Bolted Tank Liquid Storage

Outstanding performance, reliability and ease of installation| Most advanced technology in the Bolted Tank Industry| Advance sealant and mastics materials to replace old strip gaskets to reduce bolted-panel seam leaks| Smooth interior wall surface superior to older flanged panel designs| Speed and ease of manufacturing and construction| Worry-free quality in design and coatings| Least expensive solution over a lifetime| Inline design increases sealing capabilities| Green-friendly, eliminating environmental concerns| Lower production cost due to economical shipping and elimination of field welding| Bolted tanks can be relocated and expanded, improving residual value

TCIMD-1

Diseñado para operar con cualquiera de los motores de combustión interna diésel aprobados para Sistemas Contra Incendio en 12 ó 24 VAC|También es posible utilizarlo con motores de combustión interna No Aprobados que se encuentren correctamente automatizados para esta función

ECI Alta Presión

Equipo Contra Incendio Horizontal Diesel de Alta Presión|Diseñados para proporcionar gastos de hasta 750 GPM y presiones de hasta 300 PSI|Montados en base estructural que aloja todos los componentes necesarios para su operación

ECI Horizontales

Diseñados para proporciponar gastos de hasta 750 GPM y presiones de hasta 200 PSI|Conformados por una bomba horizontal acoplada mediante cople a motor eléctrico montada en una base estructural

ECI Diésel

Diseñados para proporcionar gastos de hasta 500 GPM y presiones de hasta 160 PSI|Bomba acoplada directamente al motor de combustión interna diésel|Montada en una base estructural

ECI Vertical en Línea

Diseñadas y construidos en base a las recomendaciones de NFPA 20|Ensamblados con componentes UL y FM|No requieren de alineación por lo cual su operación es muy silenciosa, esto elimina problemas de alineación

Bombas Jockey

Diseñadas para mantener la presión en la Red Contra Incendio|Desempeño de carga elevada a muy bajo gasto

Sentinel™ Vertical In-Line Fire Pumps

Compact, self-contained design|Great alternative to Sentinel HSC Fire Pumps|With the inlet and outlet on a common center line|Easy to install with simple mounting requirements|Eliminates need for costly foundations or pads|Pressure ratings from 40 to 150 psi (3 to 10 bar) deliver flow ranges of 50 to 1,250 gpm (189 to 4,731 litres/min)|Every pump has standard packing and a two-piece gland for durability

Sentinel™ Vertical Turbine Fire Pump

Most versatile pumps in Patterson's arsenal|Ideal for fighting fire|Flexible staging enables o meet capacity requirements in a minimum of floor space|Standard construction offers cast iron discharge heads with a fabricated steel column, stainless steel head and bowl shafts, or alloy steel line shaft and cast iron bronze fitted bowls|Special metallurgies are also available|No priming necessary to provide flows from 500 to 5,000 gpm (1,892 to 18,925 liters/min), with pressures in excess of 350 psi (24 bar)

Sentinel™ High-Pressure,Two-Stage DMD Fire Pump

Engineered for rugged, reliable service and is ideal for installations where space is at a premium|One two-stage unit can produce as much head as two single-stage pumps|Design highlights include single-inlet, enclosed impellers (mounted back-to-back) and an interconnecting passage between stages. Bronze or bronze-bushed interstage pieces guard against wear|Sizes range from 3-in. to 6-in. (7.6-cm to 15.2-cm) discharge for capacities to 1,000 gpm (3,785 litres/min) and heads to 1,150 ft (351 m)

Sentinel™ End Suction Fire Pumps

Featuring pressure ratings from 40 to 150 psi (3 to 10 bar) and flow rates from 50 to 750 gpm (189 to 2,835 litres/min)|Available in two configurations—frame-mounted or close-coupled|Ease of installation minimizes foundation and mounting complexity|Back pullout configuration ease removal of the rotating element without disturbing suction and discharge connections

Sentinel Pre-Pac® Fire Pump Packages

Reliable self-contained fire suppression system|Bring pumps, power and controls together to function as a fail-safe team|Budget, space and time considerations combine to make the optimal solution|Completely self-contained, Pre-Pac includes sensing lines, fittings, piping, drive, pump and controls|Reduces engineering and installation costs|All components meet or exceed applicable North American and International codes and standards|You can specify electric or diesel power, single or dual drive and a simple skid up to 12 ft by 40 ft (3.7 m by 12.2 m) with or without housing enclosures|Hydrostatically tested before shipment

Framed-Mounted End Suction HVAC Pumps.

Vertical In-Line HVAC Pumps with Integrated Drive.

Horizontal Split Case HVAC Pumps

EnviroFlo Systems Accessories

Vertical In-Line HVAC Pumps

Closed-Coupled End Suction HVAC Pumps.

Accesories

Cabinets and Escutcheons

FT Recessed Escutcheons (International)

Installation and Service Wrenches

Sprinkler Guards and Water Shields

Open Sprinklers & Nozzles

HV Spray Nozzles

Open Sprinklers

B, FM Spray Nozzles

SA Spray Nozzle

R COMEQUICK

G6-56 HSW QR

G5 Series

G4A Adjustable Concealed

XL Commercial

R ComStandardBasic

F1 Series

F1 LO

F156-300

F1-300

G

G, G/F1 Recessed

R ComStandardDecorative

G4

G4-300

G Recessed

G/F1

R ComStDry

F3-56 Dry

F3-80 Dry

R ComStExtendedCoverage

GFR VELO-ECOH Pendent

GFR VELO ECOH Upright

F156 SREC

F156-300 SREC

F1-300 SREC

R CQDry

F3QR56 Dry

DH56 Dry

F3QR80 Dry

G5-56 Dry

DH80 Dry

R CQExtensiveCoverage

G6-80 HSW QR EC

JL112 and J112 Upright

JL112 and J112 Pendent & Recessed

F1FR56 QREC

F1FR QREC

F1FR56-300 QREC

F1FR-300 QREC

F1FR QREC CCP

F1FR-300 QREC CCP

DH56

 DH80

G4 XLO-QR ECLH/ECOH

SWC

R-Comercial

F1FR Series

F1FR LO

KFR56

F1FR56-300

F1FR-300

KFR56-300

GFR

F1FR LO Large Orifice (International)

Special Response

KFR-CCS 56 Combustible Concealed Space Sprinkler

Attic Sprinklers

LT56 Series Hallway and Corridor Sprinklers

XL Series Institutional Sprinklers

F4FR-NF MRI Room Sprinklers

MBEC-14 "Metal Building Sprinkler"

F1FR-FS56, F1FR-FS42 Flat Spray (International)

F1S5-FS56, F1S5-FS42 Flat Spray (International)

F1S5 Standard Spray (International)

F1FR-FS LO Flat Spray (International)

F1-FTR Pilot Line Detector

Storage

JL-14 ESFR

JL-17 ESFR

HL-22 ESFR

XN25 ESFR

J168

N252 EC

G XLO

N252 EC - CMSA

GL 112

F156, F1FR56

KFR56 Intermediate Level

G Intermediate Level

E Alarm Check Valves with E1 Trim

CVE Swing Check & Riser Check

H Deluge Riser Assembly

E Alarm Check Valve with E2 Trim (International)

A Dry Pipe Valve

DDX Deluge Valve

E & E3 Alarm Check Valves With E3 Trim, small sizes

EX Low Pressure Dry Pipe Valve

DDX-SS Deluge Valve

E3 High Pressure Alarm Check Valve With E3 Trim

D Dry Pipe Valve

G Swing Check

G Riser Check Valves

DDX-W/D Wet/Dry Pipe Valve System (International)

Commercial Risers

Residential Riser

MP LL Multipurpose Residential Riser

C Mechanical Sprinkler Alarm

B1 Accelerator with Integral Accelo-Check

A-2 & B-1 Automatic Pressure Maintenance Devices

Air/Nitrogen Automatic Pressure Maintenance Devices

ACD Dry System Auxiliary Condensate Drain with Sight Glass

Automatic Ball Drip, Sight Drain, Control Valve Seal, Fill Cup, Inspectors Test Connections, Pressure Gauges

A Hydraulic Manual Emergency Pull Box

R PrePaKSystems

H PrePaK Preaction System

DDX Type D PrePaK Preaction System

DDX Type F PrePaK Preaction System

R DryPaKSystems

DDX-LP DryPaK System

R Deluge Preaction

Solenoid Valve

R Single Interlock Preaction Systems

H Single Interlock Preaction Systems

H Single Interlock Preaction System (Non-Supervised)

DDX Single Interlock Preaction Systems

Single Interlock Preaction System Electric Actuation (International)

R Double Interlock Preaction Systems

H Double Interlock Preaction System Type D

DDX Double Interlock Preaction System Type D

DDX Double Interlock Preaction System Type F

DDX Double Interlock Preaction System Type PL

• Grooved End Butterfl y Valves

Wall Indicator Post

Non-Rising Stem Gate Valve

Indicator Post

Resilient Seated OS&Y Flanged

1000

Lightweight and compact |300 PSI rated single handle ball valve that was specifically designed to provide both the test function and the express drain function required for a wet fire sprinkler system. |Tamper resistant test orifice, integral tamper resistant sight glasses, and a tapped port for system access. |Meet all the requirements of NFPA-13, NFPA-13R, and NFPA-13D. |Available in 3/4", 1", 1-1/4", 1-1/2", and 2" sizes in both NPT and BSPT with all specifiable orifice sizes: 3/8" (2.8K), 7/16" (4.2K), 1/2" (5.6K), 17/32" (8.0K), 5/8" (11.2K, ELO), 3/4" (14.0K, ESFR), and K25. |Model 1011A and 1011T had the added feature of a Model 7000 Pressure Relief Valve with drainage piping; |Model 1011T Add Model 7500 Pressure Gauge, and Model 7600 1/4" 3-Way Globe Valve;

1011A

Lightweight and compact |300 PSI rated single handle ball valve that was specifically designed to provide both the test function and the express drain function required for a wet fire sprinkler system. |Tamper resistant test orifice, integral tamper resistant sight glasses, and a tapped port for system access. |Meet all the requirements of NFPA-13, NFPA-13R, and NFPA-13D. |Available in 3/4", 1", 1-1/4", 1-1/2", and 2" sizes in both NPT and BSPT with all specifiable orifice sizes: 3/8" (2.8K), 7/16" (4.2K), 1/2" (5.6K), 17/32" (8.0K), 5/8" (11.2K, ELO), 3/4" (14.0K, ESFR), and K25. |Model 1011A and 1011T had the added feature of a Model 7000 Pressure Relief Valve with drainage piping; |Model 1011T Add Model 7500 Pressure Gauge, and Model 7600 1/4" 3-Way Globe Valve;

1011T

Lightweight and compact |300 PSI rated single handle ball valve that was specifically designed to provide both the test function and the express drain function required for a wet fire sprinkler system. |Tamper resistant test orifice, integral tamper resistant sight glasses, and a tapped port for system access. |Meet all the requirements of NFPA-13, NFPA-13R, and NFPA-13D. |Available in 3/4", 1", 1-1/4", 1-1/2", and 2" sizes in both NPT and BSPT with all specifiable orifice sizes: 3/8" (2.8K), 7/16" (4.2K), 1/2" (5.6K), 17/32" (8.0K), 5/8" (11.2K, ELO), 3/4" (14.0K, ESFR), and K25. |Model 1011A and 1011T had the added feature of a Model 7000 Pressure Relief Valve with drainage piping; |Model 1011T Add Model 7500 Pressure Gauge, and Model 7600 1/4" 3-Way Globe Valve;

Wilson & Cousins Hose Racks

Rated for Class II Service under NFPA/FEMA class of service. |Available with or separate components: |1-1/2” x 1-1/2” Hose Rack Assembly; |1-1/2” Single Jacket Lined Hose - UL, ULC/FM; |1-1/2” Cast Brass Coupling; |1-1/2” Fog Nozzle - UL, ULC/FM (Brass or Plastic); |1-1/2” Angle Valve F X F; |1-1/2” Brass Rack Nipple; Red Enamel Pin Back - UL, ULC/FM.

Hose Rack Accesories

Wilson & Cousins Swing Rack for 1-1/2” Hose Racks |UL, ULC and FM Listed.

Rack Nipples

Cast Brass W/ male hose thread x male pipe thread

Brecco Nexan and Brass Nozzle

Rated Class II Service under NFPA/FEMA class of service. |Recommended for fire hose cabinets and fire hose racks, for lined or unlined fire hose. |Both, the 1-1/2” NST Lexan adjustable nozzle & 1-1/2” NST Cast Brass adjustable fog nozzle are capable of complete shutoff or any degree of conical FOG. |Brass nozzle comes in Satin Brass with optional chrome plating

Brecco Hose Cabinet

Constructed of 16 gauge Coll Roll Steel and come with valve knockouts; |Interior and exterior are treated with exclusive WILCO “PRO-TECH” Premiere prime coating system; |Door fitted with 3/16” clear glass; |Stainless steel concealed latch and reinforced piano hinges |Available in White and Red.

Brecco Cap & Chains

Available in solid brass, aluminum, and plastic; |Each constructed with Female caps w/ pins and come attached with a hook and chain; |Plastic can prevent debris buildup but is not pressure testing suitable; |Floor use with Hose Valves.

Wilco Peerless 500 Emergency Fire Hose

Emergency fire hose for interior use; |Designed for racks and reels with a 100% Synthetic woven jacket and single ply w/ thermoplastic lining; |Available with brass and chrome couplings;

Wilson & Cousins Angle Hose Valve

All brass construction with cast bodies for rigidity and light weight; |Rated to 300 Lbs; |Compatible with a Fire Hose Rack Assembly or as a FDC Outlet; |UL/FM Approved; |Optional chrome plate finish;

Wilson & Cousins Pressure Restricting Angle Hose Valve

300 Lb (2070 KPa) pressure tested as an approved restricting valve; |Constructed with a lightweight cast brass body, forged line bonnet, and seat assembly; |Water pressure is controlled by an adjustable flow restriction; |Restriction may be overridden; |Field setting chart; |UL/ULC listed and FM Approved.

Bull Moose Sprinkler Pipe

Schedule 40

Schedule 40 Clear

Schedule 40 UVR

Schedule 40 Gray

Ever Tuff Turf

Compression & Repair Fittings

Swing Joints

Inserts

Nipples

Schedule 80 PVC & CPV

Flanges & Cut In Kits

Valves

Check Valves

Strainners

DWV

EverTuff CTS

Low Extractable

Clic Top & Clic Pipe
Hangers & Spacers

Solvent Cement & Thread Sealant

Lab Waste

Flame Guard

Lab & Safety

Fume & Air Duct

Pipe

Fabricated DWV

Fabricated PIP

Fabricated Low Pressure

Fabricated Low Head Pipe

Fire Protection / Seismic

Pipe Hangers & Devices

Strut Products & Accessories

Utility Pipe Fittings & Accessories

Joint Restraint

AWWA Grooved Products

Couplings (AC-9 and AC-7) |Grooved Flange Adapter (AF-4) |Grooved Fittings

AWWA C900 Pressure Pipe

Mueller® Super Centurion 350™ Hydran

350 psig (2400 kPa/24 Barg) working pressure, 700 psig (4800 kPa/48 Barg) test pressure |Sealed oil reservoir with automatic pressure lubrication |Entire hydrant - epoxy coating inside and out inhibits corrosion |Convenient, reversible main valve doubles service life |Efficient hydraulic design provides maximum flow |Certified to ANSI/NSF 61, ANSI/NSF 372 |10-year limited warranty

Mueller 350 psi Resilient Wedge Gate Valves

Mueller Swing Check

Resilient Post Indicator Valves

• UL/FM 2360, 2361, and 2362 series |Available in Non-Rising Stem (N.R.S.) with indicator Post Flange (PIV) |Non-Rising Stem with AWWA Style Stuffing Box styles. |2365 series also available as Outside Screw and Yoke (O.S.&Y.) with Handwheel (Shown Below) |Triple O-ring Seals |Non-Rising Stems with a 2” square Wrench Nut and available with several different end combinations. |All Mueller UL/FM Resilient Wedge Gate Valves are available to open left or right |Non-Rising Stem (NRS) valves have the 2” square Wrench Nut as standard |The Outside Screw and Yoke (O.S.&Y) Resilient Wedge Gate Valve has adjustable packing seal and a handwheel |Normally used for installations of fire protection systems, sprinkler risers, vaults, etc.

Mueller Indicator Posts

UL/ULC listed and 4-14" Indicator Posts are FM Approved. |Withstand up to 900 ft. - lbs. of operating torque. |Operate 4" through 24" post indicator valves |Requires 14 to 75 turns to open; |Can Open left or open right. |Available in adjustable, non-adjustable or wall mount styles. |Cast boss on the upper barrel supervisory switch to be installed. |The Adjustable Indicator Post has a 24.25" ad-justment range* |Unique telescoping stem shaft design |Base bell is attached to the lower barrel with large diameter set screws to speed installation. |Upper barrel is made of tough carbon steel |Telescoping lower barrel is made of schedule 40 PVC material (ductile iron is op-tional).

Uses operating wrench to make the post tamper proof. |The operating wrench can be stored on the Indicator Post |A slot in the wrench handle fits over a post on the barrel. |A customer supplied padlock can be used to lock the operating wrench to the barrel to resist unauthorized operation.

Smith & Cooper Grooved Fittings

UL Listed & FM Approved – sizes from 1” up to 12"; |Housing are made of ductile iron conforming to ASTM Grade A56, Grade 65-45-12; |Coating finished in Orange Paint and Hot dipped galvanized; |Electroplated track bolts conforming to ASTM A-183 with Min. tensile strength of 110,000 psi; |Grooved dimensions conforming to AWAA C-606; |For use in IPS Carbon and Stainless Steel Pipe. Grade E/T/O Pre-Lubricated Gaskets.

Cooplet Weld Outlets

Made form Sch 40 pipe , ASTM A-53 Grade A. UL Listed and FM Approved at 300 PSI; For use on Sch 7, 10 and 40 pipe of most well-known US pipe manufactures. Threaded Outlets conform to ASTM A-106, ASME B1.20.1; Grooved Outlets size-on-size are UL Listed only; Cut grooved per ASTM C606. Available in all sizes.